BACKLIGHT KIT

QUICK FACTS

  • Modernizes and individualizes car’s control elements
  • Wide range of color customization
  • Easy install, no electronics knowledge required
  • Temperature-resistant components
  • Comfortable brigtness/color adjustment
  • Easy maintenance

SUPPORTED VEHICLES

  • Toyota MR-2 ’89-’99 (Gen 2)

Get yours:

Shop now

Your car isn’t listed yet?

CONTACT US

The issue

Classic car enthusiasts often decide on older models for various reasons such as certain very desireable features having “gone away”.
Usually this concerns handling, control, reliability or repairability.

However, over those same decades, cars’ interior electronics have experienced a wide variety of developments.
Some of these either don’t detract from the points above or even improve on them. 
Examples are fully automatic up/down window switches, coming-home functionality, keyless entry, different lighting options, higher visibility and “quality” looking lighting.  

The perceived tradeoff is that some, not all, of the modern electronic amenities are sorely lacking in sought-after classic cars.
This becomes an especially painful point in those vehicles painstakingly restored or individualized by enthusiasts for the classic of their choice.

Classic interior lighting is usually designed around light bulbs and complex reflectors, carefully calibrated with the wide spectrum of light emitted by that specific kind of bulb.
Thus, simply swapping out LEDs which emit a narrower wavelenght at a reduced angle often yields results that are visually unacceptable.

Just replacing the bulbs with LED usually yields uneven results.

The concept

We want to give old user interface elements a modern makeover with several targets:

  • Help offset aged dials and surfaces (aka yellowing)
  • Improve crispness and clarity of instrument lighting only possible with LED
  • Allow for significant out-of-the-box individualization 
  • Long-term resilience of the solution
  • Installability for users without electrical knowledge
  • Retention of user-repairability
  • Designed-in reduction of shipping damage risk
 
 

The solution

The Backlight Kit.

We removed the OEM light guide and created our own LED mounting rails.
Tight space constraints, moving parts and lighting angles required to provide a quality result meant we had to find the specific shape, spacing and layout for the new lighting rails. 

Heat is an important concern as well.
Vehicle interiors can, under specific circumstances, heat up to about 80°C.
We selected materials and components designed to withstand at minimum 100°C from quality suppliers.
This ensures long and reliable service of the lighting solution for years to come.
 
To provide optimal results we worked out the precise geometries required.
3D printing proved to be the most effective method of production.
Again, heat resistance and quality manufacturing was top priority.
As a centerpiece to the solution, these rails should never fail.

Both rails are connected by precision laser-cut assembly brackets that act as levellers and precise spacers.
We specifically set tolerances a little tight so that the entire Backlight Kit will seat firmly and securely in its intended position.

Aged and “yellowed” dials can also be color-corrected by adjusting the hue of the illumination (usually towards blue).

 

Illumination:

As with the original bulbs, all light sources were, are and will be parts that have a certain design lifetime.
They are parts that wear out and will eventually need replacement.
That’s precisely why we didn’t want to create a bespoke PCB.
Because although we appreciate happy return customers, we want everybody to have the confidence and opportunity to swap lamps by themselves with as little effort as possible, should they choose to do so.  

We also kept every component user-removable:
The LED strips are held in place by low profile, semitransparent cable ties selected because they don’t impede illumination.
We had to specifically align them in order to fit the assembly.
That means that in case of swapping the LED strips, the cable ties need to be realigned in exactly the same way, for which documentation is provided.

Power and control:

The solution is powered using the original light bulb sockets. 
Power plugs right in to the OEM supply, at the socket for the bulbs at the back of the control unit PCB.

There are two versions of the Backlight Kit, the Purist Version and the Individualist version.

The Purist Version aims to deliver white, quality-improved illumination with optional colored hot-cold wedges. and brightness control.
To adjust to the optimal brightness after complete assembly and fine tuning when needed, the brightness control knob can be placed conveniently and invisibly either below the shift boot or under the steering wheel in the footwell.

The Individualist Version provides full, controllable RGB functionality to the user who wants something special to match his interior.
While this version, for technical reasons, can’t be as bright in comparison, its built-in WiFi functionality allows addressing specific parts of the Backlight Kit to light up in whatever color the user desires.

Timed effects such as color changes and waves are also possible and can be synchronized with lights in other places, i.e. the footwell.
There are almost no limits to creativity.

All units come with a basic setting preinstalled.
We plan to offer a database of user-created settings for uploading and sharing.

 

With the clear and helpful written and video guides (work in progress) available, installation can be done within minutes.

 

image Gallery